- $12.95 Shipping Australia Wide.
- International Shipping calculated at checkout.
- In stock, ready to ship
- Stock Incoming
Keep your Dockyard tools sharp with the Dockyard Gouge and V Tool Strop.
This strop offers a convenient way to maintain a tool edge while you carve. When charged with compound, its multiple profiles (5 MM, 4 MM, 3 MM, 2 MM, 1.5 MM Gouge, and 75° , 90° V angles) make it easy to quickly hone the inside face of a gouge or V-tool.
It is about 140 x 75mm and comes with a 2 oz container of honing compound.
Made in the USA.
Includes:
- Wooden strop
- 60gm strop compound
- Small brush
- Denim velcro storage pouch
Directions for use:
- Apply compound to the raised and depressed portion of the strop for each size tool you would like to sharpen. Remember, you are sharpening your tools with the compound not the wood. The wood is simply the carrier for the compound.
- The strop is designed so that the compound can sharpen both the inside (remove burs) and the outside of the tool. To sharpen the inside and remove burs on the tool you must pull the tool (trailing the sharp edge) along the raised section so that the compound is able to polish and remove burs along that edge.
- To sharpen the outside of GOUGES: Raise the handle up to make approximately a 20 degree angle with the grove in the strop. This will position the cutting edge against the compound. Rotate the cutting edge as you pull it down the grove to contact all points on the cutting surface.
- To sharpen the outside of V TOOLS: Use the flat bottom grove at the end of the strop. Sharpen one side at a time. Position the handle at a 20 degree angle so the cutting surface on one side of the V tool can contact the compound in the flat grove. With the tool in that position (20 degrees up from the grove) pull the tool the length of the groove. This will sharpen one side of the V tool. Repeat for the other side.
PLEASE NOTE: The Wood Tamer is currently at the Marmalade Festival of Carving. You may still place orders but shipping will not recommence until May 1st.
----
Orders are shipped 2-4 business days after placement and are sent via Australia Post. You will be supplied with a tracking number once shipped so you can keep track of where your parcel is at.
Please allow 5 business days for delivery and 10 business days for Western Australia, Northern Territory and Tasmania.
Orders placed on a Saturday or Sunday will be processed the following Monday or Tuesday.
Australian Shipping Rates
A $12.95 AUD flat rate shipping fee applies on all orders.
If you require your parcel more urgently then you may select Australia Post Express Post shipping for $19.95 AUD which should arrive 1-2 business days after dispatch (location dependant).
If you have any concerns please don't hesitate to get in touch with us by emailing info@woodtamer.com.au
Wood Tamer ships it's range of Spoon Carving tools Worldwide!
International Shipping rates are calculated at checkout based on the weight of your parcel. Express and Standard shipping are available.
New Zealand Shipping Rates. Shipping is available at rates calculated at checkout (weight dependant). Below is a guide only. Please allow 7-10 working days for your parcel to arrive.
| Weight | Pricing |
| < 500g | A$20.00 |
| < 1kg | A$25.00 |
| < 1.5kg | A$32.00 |
| < 2kg | A$38.00 |
| < 2.5kg | A$42.00 |
| < 3.0kg | A$47.00 |
| < 3.5kg | A$55.00 |
Talk to a REAL person who is as passionate about carving as you are. Call us between 8am and 5pm on 0413 154 024 or SMS anytime and we answer your questions or get back to you as soon as we can.
